Laser Safety Courses
Our series of Laser Safety training courses cover the current BS
EN 60825-1 and -14 and Laser Safety Standard. The courses are modular and
can be run in sequence or as individual events
Led and Lamp Safety Course
We also offer a 1-day introduction to LED and Lamp safety which
covers the BS EN 62471:2008 standard and the Artificial Optical Radiation
Laser Safety Introduction (2 day) - OCN certified award. (Buy
This 2-day version of our laser safety introduction course is based on the 1-day course, but with a little more time to explain some of the concepts more fully, and with time for assessment so that trainees gain an award from the Open College Network (OCN), a UK licensed awarding body. This introductory course is a very good start for many staff involved with lasers, and the certification from an independent awarding body licensed by the UK's Qualifications and Curriculum Authority (QCA) is valued by many laser safety officers and advisers.
Laser Safety in Fibre Optic Systems (1-day)
This is a course based heavily on our 1-day general training course in laser safety, but with additional concepts covering laser light in optical fibres and the BS EN 60825-2 standard covering laser safety in fibre optic communication systems. These concepts are covered by the 2-day OCN course above, but this course is an alternative to the 1-day general course above and is applicable to staff working with fibre optic equipment.
Laser Safety Introduction (1 day)
This 1-day course is aimed at staff who use or come into contact with
laser radiation. It is an introductory course aimed at trainees from a
wide range of backgrounds and providing a basic understanding and appreciation
of laser safety concepts, classifications, hazards and procedures.
An aim of the course is to reassure trainees when lasers are relatively
safe, and when the laser light is not the main hazard. This is important
because an irrational fear of lasers can adversely affect both safety and
LEDs are now becoming bright enough to pose a significant hazards for
those who come into close, regular contact with them. They were removed
from the BS EN 60825-1 safety standard at its last revision and now come
under BS EN 62471:2008 'Photobiological safety of lamps and lamp systems'.
This course explains this standard.
The course is also useful for those who, after reading the guide to the
Artificial Optical Radiation Directive (AORD), decide that they have non-trivial
light sources in the workplace and need to understand what is involved
in classifying such sources.
Shorter Introductory Courses?
We are often asked if we can provide two hour or even 1-hour long laser safety sessions for staff within organisations. We know many organisations deliver such sessions themselves and refer to them as laser safety training, however we do not consider that they meet the requirements of EN 60825-1. Whilst they may have some merit, we know that there is a lot of information to squeeze into a 1-day laser safety course, and we can not condense this into just two hours.
With laser safety training it is important that the training covers certain areas as described in EN 60825-1, and that the trainees are deemed competent to work with laser based products following such training. Whilst safety advisers may be happy to tick the box in a staff safety training matrix for some safety areas after a 2-hour training session, very few laser safety officers would be confident to do this.
All of our introductory laser safety training courses include a brief assessment to prove that the trainee has understood and learnt the basic concepts of laser safety. Trainees who successfuly pass the assessment are awarded a certificate of competence or alternatively an independent OCN certificate, whilst trainees who do not achieve the required score gain a certificate of attendance and will be given the opportunity to resit the assessment at a later time.
Intermediate Laser Safety Training Courses
Laser Safety Management & Implementation (1 day)
A prerequisite for this intermediate course is that the trainee has attended an introductory course or already has a good appreciation of the basics of laser safety. The aim of this course is to explain how simple procedures and rules can help produce a very effective laser safety management system, and to explain how to go about implementing laser safety in the workplace.
Trainees are shown where to start, and Lucid provide templates that can prove invaluable in quickly establishing a simple and easy yet very effective laser safety management process. This course is aimed at people responsible for implementing or managing laser safety in their organisations or in their workplaces.
Advanced Laser Safety Training Courses
We have developed a range of more advanced laser safety courses that are a natural 'bolt-on' to our introductory courses. These courses are certainly not for all staff or laser users, but we are aware that many trainees have used little maths since school or college days, so concepts and terminology are introduced accordingly.
Laser Safety Advanced Workshop (1-day)
This is a course that introduces the advanced concepts and then in a team
workshop style appropriate calculations are done, often using our LaserBee
laser safety software package. This course has proved very popular and
useful to the trainees who have been on it, although we are aware that
the 'advanced' tag and the thought of doing calculations is off-putting
to some candidates. For the brave, they will be amazed at what they learn
and proud of completing this advanced course.