Optical Services Ltd

Course Feedback

Course comments from 2003

Date Course Trainer Comments from course report forms
Dec-03 LS1 Neil Very good pace and well thought out. Would recommend to anyone, as the basics are dealt with as well as the more complex stuff
Dec-03 LS1 Neil Very useful course and well presented
Dec-03 LS1 Neil A very well presented, interesting and informative course
Dec-03 LS1 Neil Some of the overhead are transverse to those shown in the course notes. Otherwise fully content with the way the course was run.
Dec-03 LS1 Neil Very good if well packed session. Very long day.
Dec-03 LS1 Neil I am on the admin staff. Although I am not in contact with calibration it has made me aware of the hazards
Oct-03 LS1 Neil Neil was very informative and friendly. Thank you!
Oct-03 LS1 Neil Very informative, clear & aimed at the right level
Oct-03 LS1 Neil A good course - some was quite simple to follow but a lot of detail was provided
Oct-03 SM+MM Steve The course was clearly presented, and was not rushed
Oct-03 SM+MM Steve Very good course, and some of the best quality notes I have come across, both in terms of information detail and presentation
Oct-03 LS1 Neil Excellent course
Oct-03 LS1 Neil Very good course - excellent catering. Praise for the distaff side!
Oct-03 LSW1 Neil Very well presented. Enabled the understanding of a complex subject. Easier & understandable
Oct-03 LSW1 Neil The course gave me a better understanding and confidence around calculations etc.
Oct-03 LSW1 Neil Very full course with some excellent exercises to keep the brain alert throughout the day
Oct-03 DS Steve Found staff very nice and helpful
Oct-03 SM+MM Steve The course was clearly presented, and was not rushed.
Oct-03 SM+MM Steve Very good course, and some of the best quality notes I have come across, both in terms of information detail and presentation
Oct-03 MM+AOTDR Steve/John Found the course excellent. Sometimes the slides seemed out of sync with the manual. It might be an idea to put page numbers on the slides which cross reference with the manual.
Oct-03 MM+AOTDR Steve/John Very good course
Oct-03 MM+AOTDR Steve/John Thanks, found how little I know about F.O. Good course
Sep-03 DC Steve Very good
Sep-03 LSFO Neil Cheers Neil! Once again yet another excellent course from Lucid. Thanks once again Neil.
Sep-03 LSFO Neil I would have preferred an earlier finish as I had a two hour journey before and after the course
Sep-03 MM AOTDR Steve Found the course excellent. Sometimes the slides seemed out of sync. It might be an idea to put page numbers on the slides which cross reference with the manual.
Sep-03 MM AOTDR Steve Thanks, found how little I know about Fibre Optics. Good course.
Sep-03 MM AOTDR Steve Very good course
Jul-03 LS1 Neil Really interesting & informative
Jul-03 LS1 Neil A nice clear course
Jun-03 SM&MM Peter Have had a good learning experience. Everybody has been friendly and helpful. Peter has not only passed on the information but has passed on his experience which I am sure will be invaluable
May-03 FOI Steve I found the course very informative and could not find any fault with its presentation or content
May-03 FOI Steve On commencement of the course I knew absolutely nothing of fibre optics, after the course I feel I can understand the terminology & workings of fibre optics, all due to Steve's excellent tuition
May-03 FOI Steve I think the course was first rate! However, I think the course had more of a commercial bias than what this project is about, but that is not a fault. Thanks.
May-03 FOI Steve  
May-03 FOI Steve I found the course to be very helpful & also very knowledgeable. It was very well presented and easy to follow.
May-03 FOI Steve Before the course commenced I knew next to nothing about fibre optics. I found the course very informative and now have a good basic understanding of the subject. It was well presented and all necessary equipment was provided.
May-03 FOI Steve The course was very interesting and I learned a lot from it.
      This is the third Lucid course I have attended. Once again I found it well presented and the course content good, however, I found most of the course a refresher and would have preferred more time allocated to OTDR/hands-ons. As this is the part that is initially hard to digest and if not used after the course can be easily forgotten
May-03 FOMRT Steve Excellent course, well presented
Apr-03 FOMRT Steve Very good
Mar-03 AFO John In depth subject well presented and backed op by the experience of the tutors. The analogies were particularly beneficial in understanding some complex issues
Mar-03 SM&MM Steve The course has given me an excellent grounding in fibre. It has also given me an appetite to learn more.
Mar-03 SCI Steve Good course. Well presented.
Feb-03 C&G MM+SM Steve Excellent. Made me much more aware of use of fibre
       
Jan-03 FOMRT Steve A well presented course with plenty of practical experience, thoroughly enjoyed
Jan-03 FOMRT Steve Staff very knowledgeable & helpful, venue excellent, food was very good & plentiful
Jan-03 FI Steve Excellent course, better than expected. Covered all basic areas and was very well delivered
Jan-03 FI Steve Location & standard of Lucid made for probably the best courses we have attended
Jan-03 FI Steve Once again the course was excellent and met all requirements needed, will be back for splicing course
Jan-03 IJ Steve The course was very hands on and informative. The only addition I would like to add would be a description of specific ntl couplers
Jan-03 IJ Steve Very good course I feel that I have gained valuable experience in fibre management, good hands on
Jan-03 IJ Steve Very good tutor & course, Removed previous fears of fibre, both safety & faults
Jan-03 IJ Steve I would have preferred the 3 day version
Jan-03 FF&T Steve Having recently completed the basic Intro Course a lot of the same ground was covered but overall the course was excellent and will be most useful in the future
Jan-03 FF&T Steve Excellent facility and very well presented
Jan-03 FF&T Steve The Lucid training centre is probably the most comfortable yet efficient training facility I have been in. Very pleased to have been and would like to come again

Course comments from 2002

Date Course Trainer Comments from course report forms
Dec-02 FI Steve Good course, got ability to go and use knowledge in job
Dec-02 FI Steve Very informative course, excellent & helpful tutor
Dec-02 TCI Steve Course was well presented and the duration was just right
Dec-02 TCI Steve Excellent again
Dec-02 TCI Steve Very informative and useful
Dec-02 TCI Steve Very enjoyable and useful course
Dec-02 TCI Steve Excellent presentation and venue very enjoyable
Dec-02 TCI Steve Course content more useful than expected
Oct-02 AOTRD John Good course, learnt a lot
Oct-02 AOTRD John Excellent course, thank you
Oct-02 AOTRD John Good course very well presented
Nov-02 FS Steve Very practical course, now no reason not to do splicing
Nov-02 FS Steve Enjoyable course I feel confident to use the knowledge I have gained in my work
Nov-02 FS Steve I thought course was well organised & presented, it involved lots of practical hands on exercises which is the best way to learn
Nov-02 FS Steve Very well presented, with very good equipment
Nov-02 FS Steve Great course
Nov-02 CIJ Steve A great course for beginners
Nov-02 CIJ Steve A great course, would like to come back and do other courses. I think the course should be about 1/2 a day longer to allow for more splicing
Nov-02 CIJ Steve Would like to attend a testing course, OTDR and measurements etc
Nov-02 CIJ Steve I found the course very interesting seeing as though I had no previous experience, I would now feel confident in applying what I have learned on the course into practise at work. I would like to come back for the fibre testing course
Nov-02 OFS Steve Very good practical content giving good hands on experience overall a very good course
Nov-02 OFS Steve Some testing of fibre as in OTDR
Nov-02 OFS Steve I found the course & the tutor very good, very informative
Nov-02 OFS Steve Very good course, good mix of theory & practical, would recommend
Nov-02 OFS Steve Great course, great tutor, pity we all nearly fell asleep because the room was too hot
Nov-02 C&G Peter The whole course & people involved has been superb. An invaluable experience which has given me a very firm step onto the first rung in optics. Thank you all
Oct-02 FOMRT Steve I felt that the first day & a half was revision and could have been condensed down to half a day. This would have allowed more time to practice OTDR work & fault finding. I felt that I would have benefited from some step by step work sheet for the OTDR to build up my skill and confidence using the OTDR
Oct-02 FOMRT Steve Course covered too much ground already learned in fibre & copper intro course last time
Oct-02 FOMRT Steve Great location, no work distractions. Helpful & knowledgeable tutor who took time to explain
Oct-02 FOMRT Steve I now have better understanding of test results on OTDR
Oct-02 FOMRT Steve The environment was very good
Oct-02 FOCCI Steve Thank you for a great course
Oct-02 FOCCI Steve No info prior to course or joining instructions, probably ntl's fault
Oct-02 FOCCI Steve Venue was too far from home base
Oct-02 FOMRT Peter This course will help me understand more when working with contractors
Oct-02 FOMRT Peter Would have liked to have spent a little more time on the splicing
Oct-02 FOMRT Peter The facilities were excellent, course tutor very knowledgeable & the course run at about the right speed, enjoyable
Oct-02 FOMRT Steve All staff helpful, friendly, approachable & informative
Oct-02 FOMRT Steve A very enjoyable and worthwhile course
Oct-02 FOMRT Steve Chairs in training room became uncomfortable after about an hour due to large angle of back support
Oct-02 FOMRT Steve Have really enjoyed the course, thought Steve put it over very well and was very helpful in all aspects
Sep-02 DWDM John A complex subject covered with great knowledge and professionalism. The only criticism is ones ability to cereably absorb all the information proferred
Sep-02 C&Gint Steve Very very grateful to be offered this course, I am very happy with the outcome and look forward to getting into this industry. The location, staff and hands on was second to none. I hope to hear that Lucid expand well in the future. Thank you to all involved
Sep-02 C&GInt Steve I have completed main areas of training and can honestly say that this course has been the best one for practical hands on activity. Which in my opinion accentuates the learning process
Jul-02 LS Neil It would be good to see more working examples with real figures. I would like also to practice with the provided formula's i.e. at the end of a module we could solve 1-2 problems in order to familiarise with new terms
Jul-02 LS Neil Very comprehensive course, very knowledgeable tutor, good informal style
Jul-02 LS Neil I think more time could be spent on doing examples and less spent on covering the very basics
Jul-02 LS Neil More practice & working on problem examples 4 x 1/2 days would be better
Jun-02 LS John Good course, not boring at all. Covered all that we required, look forward to attending some other Lucid courses
Jun-02 LS John Very enjoyable and informative
Jun-02 LS John Instructor very good - I didn’t fall asleep
Jun-02 LS John Very informative & enjoyable course
Jun-02 LS John Course content & style was tailored appropriately to participants
Jun-02 LS John The analogies / stories were helpful in explaining certain aspects of the course
Jun-02 LS John Course very interesting and has given me a greater understanding into lasers and their role in the industry
May-02 AOTDR John The course was very well presented, well structured and very informative. The presentation of the 3 ODTRs and their uses was performed very well showing advantages and disadvantages individually
May-02 AOTDR John Good training starting from basics/first principles, this will be very valuable in my work
May-02 AOTDR John I enjoyed the course thoroughly, tutor took consideration to answer all the queries particularly those the group were interested in
May-02 AOTDR John The presentation and explanation of all aspects was very clear and enjoyable which helped the learning experience
May-02 APMD John Excellent course
May-02 APMD John I enjoyed the course and appreciated the informality
May-02 APMD John Well presented with some very complicated material, enjoyed and understand a lot more about fibre
May-02 APMD John Many thanks for another informative course
May-02 APMD John Excellent course well presented, subject well covered
May-02 AOTDR John Very good, may benefit from extra day to cover different OTDR manufactures and cover actual trace diagnostics on actual test trace's
May-02 AOTDR John Excellent very informative course and well presented and tutor very knowledgeable
Apr-02 C&G SM Steve Excellent
Apr-02 C&G SM Steve The course content and delivery was very well put over in easy to learn and practical steps and all questions answered in a very good manner
Apr-02 LS Neil A lot of technical information into two days, especially day two and for those of us not doing a Phd it was a lot to sink in. However on the whole a rewarding/challenging course that I found most enlightening
Apr-02 LS Neil I would increase the second part of the course focusing it for people who use laser every day and understand safety
Apr-02 LS Neil 2 days seemed a little short for the amount of material covered. It would be useful to separate laser/ fibre optic laser safety, otherwise excellent
Apr-02 AOTDR John The course was very knowledgeable and helpful in explaining the use of an OTDR. As a result I feel more confident in operating the equipment. Many thanks
Apr-02 AOTDR John Most enjoyable and easy to follow. Instructor was clear and happy to answer any questions, it wasn’t rushed. The course will be very useful when we get back testing fibre
Apr-02 AOTDR John A very enjoyable course that I would recommend to other people
Apr-02 AF John Ideally some of the physical experiments demonstrated would be beneficial, this could be achieved by short videos of such experiments
Apr-02 AF John A lot of theory and it would have been good to have seen some of the test equipment in action. All in all I learnt an awful lot and am very confident that the material will be useful
Apr-02 MF Neil It was very helpful
Apr-02 MF Neil A very good introduction to fibre optic measurements, from simple basics to levels on practice. I look forward to the next in the series
Apr-02 MF Neil Suggest that more time is available for practical usage of equipment. Theory accompanied with practical use and more equipment time
Apr-02 MF Neil Very interesting and well rounded in terms of test and measurement. I'm looking forward to subsequent courses on analysis of commercial gratings and devices used to measure their performance
Mar-02 C&G SM Steve I have attended numerous courses during the past 23 years whilst at EC. This course was very well presented and most informative. The relaxing atmosphere of the venue also contributed to the way the course was held.
Mar-02 C&G SM Steve The course was very good and very well presented. I would recommend it and would like to attend other courses if my company is willing to pay for them
Mar-02 C&G SM Steve The course was how I had hoped, and cleared up points that in house training had not. Everything else was very good
Feb-02 FOCCI Steve I have found the course very useful and I have truly learned a lot. Steve has been a great tutor which I believe helps with the intake of all this information
Feb-02 FOCCI Steve The course content and management was very good
  C&G SM Peter Excellent course , very professional, informative and interesting. Many thanks to Peter, I have learned a huge amount in a week
Feb-02 C&G SM Peter I found this course very educational and all the staff are friendly and competent at what they do
Feb-02 FOCCI Steve Instructor was very knowledgeable. No complaints as course was instructed very professionally
Feb-02 FOCCI Steve A good insight and instruction into the fields covered without too much technical jargon
Feb-02 APMD John A little mind boggling at times but I am sure over time and with more hands on experience and referring back to the manual, information will sink in
Feb-02 APMD John Excellent course, plenty of extremely useful info, good coverage of all subjects. Will come back for future courses.
Jan-02 LS John A good course I would have liked to use more material on safe lab practices for work with laser beams.
Feb-02 C&G MM Peter Too much to say about Peter, he was an outstanding tutor, an asset to Lucid
Feb-02 C&G MM Peter The course was well run and well tutored, a very good course
Jan-02 LS John Get important information into the morning session

More comments from 2004-2005 and 1999-2001

 

About Us | Site Map | Privacy Policy | Contact Us | ©2005 Lucid Optical Services Ltd.